The print results break up canon mg2570
Canon Printer Damage: Intermittent Print Results. There are
2 kinds of reasons why the printouts for Canon printers are intermittent,
namely:
1. The printer ink on the cartridge has run out
2. The cartidge is dry, so the ink does not come out.
For the first problem, of course you already know what to
do. Of course by refilling the cartridge. You can use Canon's Manxi Ink to fill
it.
For the second damage, you can check it first.
How:
1. Click Devices & Printers -> Printers ->
Properties -> Maintenance -> Cleaning. Do this 1-2 times, after that
check the cleaning results by clicking "Nozzle check". If the results
of the lines are not intermittent (like a printed example from software) it
means that you have succeeded in fixing the printer problem.
2. If the above method doesn't work, you can do a deep
cleaning once by clicking “Deep Cleaning”.
Deep cleaning and cleaning functions to pump out the ink on
the surface of the cartridge holes.
3. If the two methods above still don't work, you must use
the following method:
o Open the printer cover and take the cartridge. Soak the
bottom of the cartridge in Cleaner for a few minutes. (depending on the damage,
if it is severe it can be soaked for 1 day) Let the ink come out of the
cartridge hole. Its function is to dilute the dry printer ink.
Read More : How to reset a Canon MP287 printer that doesnt work
o After a few minutes / hours, dry the bottom of the
cartridge using a tissue. Check with a tissue on the surface of the cartridge
hole whether the ink can come out or not. If all the colors come out, it means
that the cartridge is good.
o Please refill with Canon Manxi Ink because earlier the ink
in the cartridge came out a lot and dissolved with Cleaner.
o After that put the cartridge back into the printer.
A printer that has a problem like this has several causes. A
very severe risk if the printer experiences this problem is having to buy a new
cartridge, by replacing the cartridge it will be very detrimental to you
because the price of the cartridge is quite a drain on your wallet: 3. causing
confusion. But to be more certain, you can check carefully and match the causes
of the printer striped and the printouts are broken, which the printer-hero
will describe below:
Problems that often occur until the printer causes the printer to print lines and breaks:
1. Clogged Head Catridge
• This occurs because of several problems such as, long time
leaving the printer not to print, aka (forgotten), causing the ink to clot in
the cartridge head, infusion tube or printer area that is not maintained clean,
usually dust and dirt will enter the tube and become one with ink, so it
becomes a clot that makes the cartridge head clogged. How to overcome :
• Smooth siding on the head with a tissue
• Soak with warm water (Less recommended)
• If necessary, bring the cartridge to the nearest service,
to do suction with a special tool.
2. The Timing Strip / Encoder is Dirty and Affected by Ink.
• Timing Strip or what is more often called the printer
encoder is rarely thought of on the problem of striped and dotted prints, even
though this encoder is often the cause. Usually occurs because the printer
works often, and occasionally there is a stuck print or paper. clock, causing
the encoder to become exposed to ink and dirt. this causes the encoder
difficult to read by the machine in the cartridge housing. How to overcome :
• Clean the Encoder located at the back of the cartridge
house with a soft tissue. try to clean it carefully, and thoroughly.
Read More :How to Fix E05 Error on a Canon MP287 Printer
3. Perform Head Cleaning or cleaning the print
• Head Cleaning is necessary if you find your printer
printing with lines and dotted results. but before doing head cleaning, it's a
good idea to do a Nozle Check to find out the results of the normal print
cartridge in what state it is. and if the result is not like the (perfect)
example that is displayed on the screen. then you must do Head Cleaning /
Cleaning to remove (clean) some of the ink in the cartridge so that the print
results are perfect and smooth.
4. Ink is not supplied to the cartridge
• For those of you who use printers with infusion
modifications, you will definitely experience this. Ink flowing from the IV
tube through the air intake tube causes the ink to stop running towards the
cartridge. because the ink is not supplied properly in the printer cartridge
print with the results of lines and dotted. How to overcome :
• Make sure you are not late in refilling the ink (the first
thing that causes colds). Smooth the ink nets by blowing the wind in the
sidelines
0 Response to "The print results break up canon mg2570"
Post a Comment